Applying extra wrapping with the Eva pallet wrapper

The Atlanta stretch Eva pallet wrapper, while the interface is basic and simple allows for easily adjustments of wrapping settings, to wrap your pallets the way you want them. In this quick guide we tell you the different ways to apply extra wrapping on the Eva. There are more options for wrapping on more advanced models such as the Synthesi or Mytho pallet wrappers.  

Top And bottom wraps
You can apply more wrapping to the top and bottom of the pallet by changing the amount of wraps, settable from 0-9 at the top and bottom stages of wrapping its a quick way to apply extra wrapping. 

Apply more wraps to the entire pallet
If you want just more wrapping around the pallet in general, what you want to do is slow the carriage assent and decent speed, if the carriage ascends slower during pallet rotating, it will apply more wrap to the entire pallet. 

Banding and semi manual modes.
the Eva pallet wrapper can be used in the normal semi auto mode and when the carriage is ascending or descending it can be paused manually at its current Height. To do this you simply press the down arrow if the carriage is going up, or the up arrow if the carriage is going down. 

When in semi auto mode, and the carriage has detected the top of the pallet and stopped ascending you can also override this manually by press the up arrow. This maybe good if your pallets aren't uniform, you have goods ontop or are doing something a little squishy like bulk bags. 

Manual mode
The Eva pallet wrapper from Atlanta stretch can be switched to full manual mode. When in manual mode, the start button only spins the turntable, when the height of the carriage is controlled manually by the up and down buttons. 

We hope this guide helped you in getting to know the Eva pallet wrapper, if you purchase an Atlanta Pallet wrapper through us, including installation and training we will guide you through these steps.