In this video and written guide we will show you how to change the BXT3 battery powered strapping tool tension and welding settings.
The set tension force is displayed continuously when the tool is ready for operation.
► Press "Tension force" button (2).
– The set tension force flashes for 5 seconds.
– The + (1) and – (3) buttons appear
– Unused displays disappear.
► Press the + (1) or – (3) button until the desired tension force is displayed.
– The status indicator bar (4) shows the set tension force in relation to the possible maximum value.
► Save: Press the "Tension force" button (2) or wait for 5 seconds.
● Switch between display in "N" or "lbf": Press the flashing "Tension force" button (2) for two seconds.
● Every time the button is pressed an acoustic signal confirms the action.
● The tension force is displayed continuously when the tool is operational.
BXT3 tension values are below.
